Modular Chain Conveyors

Flexible plastic chain conveyors that turn, climb and accumulate, built around your product and your floor plan.

A modular plastic chain conveyor carries product on a flexible chain made of plastic links that runs in an aluminum or stainless beam. Because the chain bends sideways and vertically, one conveyor can follow a complex route through curves and inclines without transfer points. Flex-Line has designed, built and installed these systems since 1984.

Modular chain is the conveyor type Flex-Line knows best. It handles bottles, cans, cartons, pouches, blister packs, machined parts and assemblies, and it fits into floor plans where a straight belt cannot go. We design the layout, assemble and test the system in Chester, Illinois, install it on site and stock the wear parts that keep it running.

Where Modular Chain Conveyors Fit

  • Complex routes. Horizontal and vertical bends allow flexible layouts, including elevation changes, in one continuous run with no transfer points for product to tip over.
  • Small and delicate products. Bottles, vials, aerosol cans and personal care products ride smoothly, with or without pucks and with fixed or adjustable guide rail set to the product.
  • Machined and heavier parts. When the standard acetal resin chain isn't enough, steel top and other link materials are available to handle heavy bearings and other automotive and machined parts.
  • Accumulation and buffering. Low-friction chain and multiple layout options let product queue without damage while a downstream machine catches up.
  • Elevation changes. Alpine, wedge and spiral configurations move product between levels in a small footprint.
Customized guiderail safely guides products in motion.
Customized guiderail safely guides products in motion.

Chain and Beam Options

The right chain depends on the product, the speed and the environment. Options we specify and build with include:

  • Plain and ultra low wear plain chain for general transport and accumulation.
  • Cleated and flapper chain to hold spacing, climb inclines or change orientation.
  • Flocked chain and covered guide rail to prevent marring on finished surfaces.
  • Roller chain for low back pressure, such as blister packs.
  • Fixtured chain, pucks and pallets customized to a specific part geometry.
  • Specialty chain, such as heat resistant, steel top or static dissipative options, for demanding applications.
  • Aluminum or stainless steel beams, with stainless for washdown and hygienic lines.

Beam sizes run from narrow conveyors for small components to wide chain for cases and trays, plus twin-track pallet conveyors for assembly and test lines.

Product Lines We Build With

Flex-Line is an independent system builder, so we choose the chain conveyor that fits the job. We have built with FlexLink modular chain since 1984 and are an Authorized FlexLink Partner. We also build modular plastic chain and flat top chain conveyors with components and solutions from Carryline, Bosch Rexroth, Dorner and mk North America. FlexLink conveyor systems · mk North America flat top chain conveyors

What We Need to Quote a Chain Conveyor

  1. The product. Material, weight, dimensions and how it must be oriented.
  2. The rate. Products per minute, and whether you need accumulation.
  3. The route. A plant layout, or the dimensions from point A to point B, including any elevation change.
  4. The environment. Speed, washdown, coolant or cutting fluid, and temperature all change the chain and wear strip we specify.

Parts and Support for Chain Conveyors

Chain, wear strip, guide rail and drive components wear in predictable patterns. We stock replacement parts in Chester and can identify parts for systems we did not build. Conveyor parts and components · Conveyor chain and belt parts · Wear strips and guide kits

Our wide selection of chains ensures that products stay unscathed, even during accumulation.
Our wide selection of chains ensures that products stay unscathed, even during accumulation.

Frequently Asked Questions

What is a modular plastic chain conveyor?

A conveyor built from standard components that carries product on a flexible chain of plastic links running in an aluminum or stainless steel beam. The chain bends sideways and vertically, so one conveyor can follow curves and inclines without transfer points.

What is the difference between chain and belt conveyors?

Plastic chain conveyors allow more flexible layouts than belt conveyors because their modular components support small radius turns and 90-degree elevation changes. They can also be reconfigured if a line changes, and the parts can be reused, which is not an option with belt conveyors. Standard chain is generally smoother, with less friction, which suits accumulation applications.

Can a chain conveyor run in washdown or hygienic areas?

Yes. Stainless steel beams and suitable chain are used for food, dairy and pharmaceutical lines where the conveyor must be cleaned regularly.

Does Flex-Line only build FlexLink chain conveyors?

No. Flex-Line is an independent system builder. We have built with FlexLink since 1984 and are an Authorized FlexLink Partner, and we also build with other product lines such as Carryline, Bosch Rexroth, Dorner and mk North America.

Can you supply parts for an existing chain conveyor?

Yes. We stock chain, wear strip, guide rail and drive parts and can identify parts for systems we did not originally build.

Plan a Chain Conveyor

Tell us what the product is, how fast it moves and where it needs to go.